Automation Products

From SupportWiki
Jump to: navigation, search

Sixnet’s rugged RTUs and I/O provide a simple yet powerful means to reliably monitor and control remote sites around the clock in the harshest environments. Our compact automation systems can start small and grow as needs increase without requiring hardware replacement. Virtually unlimited scalability means organizations have fewer restrictions on the number of remote sites or devices that are supported. "Best of both worlds" programming combines Windows ease of use with the future-proof security of an embedded Linux OS.

Please select a topic from the table of contents or click on the product you need assistance with from the table below.

If you require an analysis of your application by Sixnet Technical Support, please review: Gathering Information for Analysis by Sixnet

For customers who have SixTRAK IO modules they wish to replace, please review the SixTRAK IO Replacement Guide to select a current model.

Contents

RAM 6000 Cellular RTU Series

Model Description
RAM-6400
Sn6600DC.png
Cellular RTU, Modbus gateway with full router capability, 1 Ethernet port, ,1 serial port, EDGE/GPRS
RAM-6401
SN6601.png
Cellular RTU, Modbus gateway with full router capability, 1 Ethernet port, ,1 serial port, EDGE/GPRS
RAM-6421
Sn6621.png
Cellular RTU, Modbus gateway with full router capability, 5 Ethernet ports, 1 serial port, EDGE/GPRS
RAM-6600
Sn6600DC.png
Cellular RTU, Modbus gateway with full router capability, 1 Ethernet port, 1 serial port, CDMA/EVDO Rev.A
RAM-6601
SN6601.png
Cellular RTU, Modbus gateway with full router capability, 1 Ethernet port, 1 serial port, CDMA/EVDO Rev.A
RAM-6621
Sn6621.png
Cellular RTU, Modbus gateway with full router capability, 5 Ethernet ports, 1 serial port, CDMA/EVDO Rev.A
RAM-6800
Sn6600DC.png
Cellular RTU, Modbus gateway with full router capability, 1 Ethernet port, 1 serial port, HSPA/EDGE/GPRS
RAM-6801
SN6601.png
Cellular RTU, Modbus gateway with full router capability, 1 Ethernet port, 1 serial port, HSPA/EDGE/GPRS
RAM-6821
Sn6621.png
Cellular RTU, Modbus gateway with full router capability, 5 Ethernet port, 1 serial port, HSPA/EDGE/GPRS

Industrial Controllers, RTUs and I/O Gateways

Product Part Number Description Eth 232 485 DI DO AI AO ST-BUS NVRAM Flash DRAM programming Program Flash Memory Dram
ST-IPM-6350 Linux IPm Open DCS Controller 5 2 1 - - - - Yes 2M 118M - ISaGRAF Linux & C/C++ 128M 64M
VT-IPM-1410 Linux IPm Open RTU 1 3 1 - - - - Yes 512K 6M - ISaGRAF Linux & C/C++ 16M 16M
VT-MIPM-245-D Mini-IPm Plus with AGA & DNP3 1 2 2 12 4 8 2 - 512K 54M - ISaGRAF Linux & C/C++ 64M 32M
VT-MIPM-135-D Mini-IPm Plus with AGA & DNP3 1 2 1 12 8 6 - - 512K 54M - ISaGRAF Linux & C/C++ 64M 32M
VT-UIPM-431-H Micro-IPm RTU 1 2 1 8 4 2 - - 512K 6M - ISaGRAF Linux & C/C++ 16M 16M
VT-IPM2M-113-D VT-IPm2m RTU 1 1 1 12 4 8 - - 512K 20M 20M ISaGRAF Linux & C/C++ 32M 32M
VT-IPM2M-213-D VT-IPm2m RTU 1 1 1 12 4 8 2 - 512K 20M 20M ISaGRAF Linux & C/C++ 32M 32M

EtherTRAK2 Ethernet I/O

Product Part Number Description DI AI DO AO
E2-MIX24880-D* Combination I/O with one isolated input counter (see Note 1) 24 8 8 -
E2-MIX24882-D* Combination I/O with two analog outputs (see Note 1) 24 8 8 2
E2-32DI24-D* 32 inputs (10-30 VDC) including 16 multifunction counters 32 - - -
E2-16DI24-D* 16 individually isolated 10-30 VDC with counters 16 - - -
E2-16DIAC-D 16 individually isolated 120 VAC (nominal) inputs 16 - - -
E2-32DO24-D* High density discrete outputs 0.5 Amp each, 8 Amps total (See note 2) - - 32 -
E2-16DO24-D* Individually isolated 1 Amp outputs, 16 Amps total (See note 2) - - 16 -
E2-32AI20M-D* High density 16 bit 4-20 mA inputs (See note 2) - 32 - -
E2-32AI10V-D* Voltage inputs 0-10V (other ranges available as special order) - 32 - -
E2-16AI20M-D* 16 channels 4-20 mA inputs (See note 2) - 16 - -
E2-8AO20M-D* 4-20 mA analog outputs - - - 8
E2-16AI-8AO-D* 16 4-20 mA analog inputs and 8 4-20 mA outputs - 16 - 8
E2-16ISO20M-D* 16 Individually 4-20mA analog inputs (See note 3) - 16 - -
E2-16ISOTC-D* 16 Individually isolated thermocouple inputs with J,K, E, R, T, C, N, S - 16TC - -
E2-8ISOTC-D* 8 Individually isolated thermocouple inputs with J,K, E, R, T, C, N, S - 8TC - -
E2-10RTD-D* RTD (100 Ohm platinum), -200 to 850°C - 10RTD - -
E2-16DORLY-D* 16 individually isolated discrete outputs (10-30VDC/VAC Relay) 1 Amp outputs, 16 Amps total. - - 16
E2-MIX20884-D Combination I/O with 4 isolated input counters and 4 analog outputs. 20 8 8 4
*For these models, replace E2 with EB for an EtherTRAK-2 module that supports PoE power input

EtherTRAK2 and Etherbus Accessories

Product Part # Description
EB-5ES-PSE-1 5 port PoE Switch with 5 RJ45 ports (4 PoE ports)
EB-PSE-24V-1A 1-port PoE injector, 24 VDC to PoE on unused pairs
EB-PSE-48V-2A 2-port PoE injector, 48 VDC to PoE on unused pairs
EB-CAT5E-100B 100 meter industrial Ethernet bulk cable reel
EB-CAT5E-300B 300 meter industrial Ethernet bulk cable reel
ET-PS-024-02 Universal AC/DC power supply (24 VDC, 2 Amps max.), DIN rail mount
ST-PS-024-05 AC/DC power supply (24 VDC, 5 Amp max.), DIN rail mount

Legacy Products

Industrial Controllers, RTUs and I/O Gateways

As a result of Red Lion’s acquisition of Sixnet, we are pleased to announce that the following Industrial Automation models previously designated as End of Life (EOL) products are now back in production and available to order: ET-GT-ST-3, EtherTRAK I/O modules, RemoteTRAK I/O modules, ST-GT-1210, ST-IPM-1350, ST-IPM-2350, VT-IPM-2410, VT-MIPM-131-D, VT-MIPM-241-D & VT-uIPm-441-H

View the Announcement for further details


Product Part Number Description Eth 232 485 DI DO AI AO ST-BUS NVRAM Flash DRAM programming Program Flash Memory Dram
ST-IPM-2350 Linux IPm Open DCS Controller 5 2 1 - - - - Yes 2M 6M - ISaGRAF Linux & C/C++ 16M 16M
ST-IPM-1350 Linux IPm Open DCS Controller 5 2 1 - - - - Yes 512K 6M - ISaGRAF Linux & C/C++ 16M 16M
VT-IPM-2410 Linux IPm Open RTU 1 3 1 - - - - Yes 2M 6M - ISaGRAF Linux & C/C++ 16M 16M
VT-MIPM-241-D Mini-IPm RTU 1 2 2 12 4 8 2 - 512K 6M - ISaGRAF Linux & C/C++ 16M 16M
VT-MIPM-131-D Mini-IPm RTU 1 2 1 12 8 6 - - 512K 6M - ISaGRAF Linux & C/C++ 16M 16M
VT-UIPM-441-H Micro-IPm RTU 1 3 1 8 4 - - - 512K 6M - ISaGRAF Linux & C/C++ 16M 16M
ST-GT-1210 Controller 1 1 1 - - - - Yes 512K 6M - ISaGRAF Linux & C/C++ 16M 16M
ET-GT-ST-3 I/O Gateway 2 1 - - - - - Yes - - - Sxtools - -
RM-RTU-8440-F Low Cost RTU - 8 4 4 - - - - - - - Sxtools - -

EtherTRAK® Ethernet I/O

As a result of Red Lion’s acquisition of Sixnet, we are pleased to announce that the following Industrial Automation models previously designated as End of Life (EOL) products are now back in production and available to order: ET-GT-ST-3, EtherTRAK I/O modules, RemoteTRAK I/O modules, ST-GT-1210, ST-IPM-1350, ST-IPM-2350, VT-IPM-2410, VT-MIPM-131-D, VT-MIPM-241-D & VT-uIPm-441-H

View the Announcement for further details

Part # (Module with base) Description DI AI DO AO
ET-16DI2-H 10-30 VDC, high density configuration 16 - - -
ET-16D02-H 10-30 VDC, 1 Amp per channel, high density configuration - - 16 -
ET-16AI2-H 4-20 mA, high speed, 14-Bit - 16 - -
ET-8INS-U Instrumentation (thermocouples, mV, volts & mA), 16-bit - 8 - -
ET-8CNT-U High speed counters (quadrature, frequency & more), 32-bit 8 - - -
ET-8DI2-8DO2-H 10-30 VDC, 1 Amp per output channel 8 - 8 -
ET-8DI2-8AI2-H 10-30 VDC and 4-20 mA, 14-bit 8 8 - -
ET-8AI2-4AO2-H 10-30 VDC and 4-20 mA, 14-bit - 8 - 4
ET-4RTD-4DI2-U 10-30 VDC and 4-20 mA, 14-bit 4 4 - -
ET-MIX24880-D 10-30 VDC and 4-20 mA, 14-bit (see Note 1) 24* 8 8* -

EtherTRAK Accessories

Part # Description
ET-GT-ST-3 EtherTRAK I/O Concentrator - connect SixTRAK & RemoteTRAK modules
ET-PS-024-02 Universal AC/DC power supply (24 VDC, 2 Amps max.), DIN rail mount
SP-ETH-2 Ethernet surge & lightning protector (protects 2 RJ45 ports)
ST-CABLE-PF RS232 configuration cable, PC to ET-GT-ST-1, DB9F to DB9F, null-modem, 8 ft.
ET-GT-232-1 EtherTrak Gateway, Ethernet to RS232 Converter
ET-GT-485-1 EtherTrak Gateway, Ethernet to RS485 Converter

RemoteTRAK® RS485 I/O and Accessories

As a result of Red Lion’s acquisition of Sixnet, we are pleased to announce that the following Industrial Automation models previously designated as End of Life (EOL) products are now back in production and available to order: ET-GT-ST-3, EtherTRAK I/O modules, RemoteTRAK I/O modules, ST-GT-1210, ST-IPM-1350, ST-IPM-2350, VT-IPM-2410, VT-MIPM-131-D, VT-MIPM-241-D & VT-uIPm-441-H

View the Announcement for further details

Part # (Module with base) Description DI AI DO AO
RM-8DI2-F 10-30 VDC, field wiring base (-F) saves on wiring and time 8 - - -
RM-8DI2-U 10-30 VDC, universal base (-U) provides extra isolation 8 - - -
RM-16DI2-H 10-30 VDC, high density configuration 16 - - -
RM-8DO2-F 10-30 VDC, 3 Amps per channel - - 8 -
RM-16DO2-H 10-30 VDC, 1 Amp per channel, high density configuration - - 16 -
RM-8AI2-F 4-20 mA, 16-bit - 8 - -
RM-16AI2-H 4-20 mA, high density configuration, 16-bit - 16 - -
RM-8INS-U Instrumentation (thermocouples, mV, volts & mA), 16-bit - 8 - -
RM-4AO2-F 4-20 mA, 13-bit - - - 4
RM-8AO2-F 4-20 mA, 13-bit - - - 8
RM-4DI2-4AI2-U 10-30 VDC and 4-20 mA, 16-bit 4 4 - -
RM-4DI2-4DO2-U 10-30 VDC, 1 Amp per output channel 4 4 -
RM-RTU-8440-F Lowest cost RTU / combination I/O module 8 4 4 -
RM-232-485-4U Converter for RS232 to RS485 (2 wire), connect up to 128 modules
RM-232-SETUP Field setup module (includes ST-CABLE-PF). Required for initial configuration.

SixTRAK® I/O and Accessories

Part # (Module with base) Description DI AI DO AO
ST-DI-005-08F / -08U 4-10 VAC/VDC 8 - - -
ST-DI-024-08F / -08U 10-32 VAC/VDC 8 - - -
ST-DI-048-08F / -08U 32-60 VAC/VDC 8 - - -
ST-DI-120-08F / -08U 60-140 VAC/VDC 8 - - -
ST-DI-240-08F / -08U 140-265 VAC 8 - - -
ST-DI-024-16H 10-32 VDC, high density configuration 16 - - -
ST-MIX16880-D Double density combination module with 32 mixed I/O points 16 8 8 -
ST-MIX12884-D Double density combination module with 4 analog outputs 12 8 8 4
ST-DI-024-32D 10-32 VDC, double density configuration 32 - - -
ST-DI-CNT-08U 4-30 VDC, high-speed counters, 50 kHz max. rate 8 - - -
ST-DO-DC1-08F / -08U 0-60 VDC, 2A/channel - - 8 -
ST-DO-DC3-08F / -08U 60-150 VDC, 1A/channel - - 8 -
ST-DO-AC1-08F / -08U 16-140 VAC, 2A/channel - - 8 -
ST-DO-AC2-08F / -08U 140-265 VAC, 2A/channel - - 8 -
ST-DO-DC2-16H 10-32 VDC, 0.5 Amps per channel - - 16 -
ST-DO-RLY-06U Form C (SPDT), 0-140 VAC/VDC, 2A per channel - - 6 -
ST-AI-INS-08U Instrumentation (thermocouples, mV, volts & 4-20 mA) - 8 - -
ST-AI-20M-08F 4-20 mA, field wiring ready - 8 - -
ST-AI-20M-16H 4-20 mA, high density configuration - 16 - -
ST-AI-10V-08F + / - 1, 2, 5, 10 volts - 8 - -
ST-DO-AC2-08F / -08U 140-265 VAC, 2A/channel - - 8 -
Note: An ST-BUS-KIT is included with each SixTRAK I/O module. Kit includes 5 wiring jumpers and extra terminal labels


- ##F = Field wiring base saves on wiring and time

- ##U = Universal base provides extra isolation

Training

Are you new to Sixnet Automation products, or need a refresher? Please review some of the training material below to help you get started!

Basic Datalogging Training
Introduction to IO Transfers
Introduction to the Sixnet IO Toolkit
Getting Started with Sixnet RTUs
Configuring Redundancy in your Sixnet IO
Writing a Client Transfer

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox